Product ID:ITW RAMSET/RED HEAD EPCON SYSTEM CERAMIC 6 RESIN
MSDS Date:01/20/1995
FSC:6850
NIIN:00F039558
Kit Part:Y
MSDS Number: BWXGD

ITW PHILADELPHIA RESINS CORP

130 COMMERCE DR
MONTGOMERYVILLE, PA 18936-5000
US

Emergency Phone: 215-855-8450

Info Phone: 215-855-8450

Cage: ITWPH

ITW PHILADELPHIA RESINS

454 MONTGOMERYVILLE, PA 18936 US

Telephone: 508-777-1100

Cage: ITWPH

BISPHENOL A DIGLYCIDYL ETHER RESIN, EPOXY RESIN, EPON 820,

CAS: 25068-38-6

RTECS: KD4380000

Fraction By Weight: >60%

CATALYST AMORPHOUS SILICA *95-1*

CAS: 67762-90-7

Fraction By Weight: 1-5%

ACGIH TLV: 10 PPM

TALC (POWDER), (ASBESTOS FREE), TALCUM; HYDROUS MAGNESIUM

CAS: 14807-96-6

RTECS: WW2710000

Fraction By Weight: 5-10%

ACGIH TLV: 2 MG/CUM (RESP DUST)

TITANIUM DIOXIDE, TIO2 (SUSPECTED ANIMAL CARCINOGEN, IARC

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 1-5%

OSHA PEL 15 MG/CUM

ACGIH TLV: 10 MG/CUM (DUST)

GLASS, OXIDE *95-1*

CAS: 65997-17-3

Fraction By Weight: 5-10%

ACGIH TLV: 15 PPM

LD50 LC50 Mixture:ORAL LD50(RAT): 11.4 MG/KG EPOXY RESIN
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN: RESIN IS MODERATELY IRRITATING &
MAY CAUSE SENSITIZATION. EYES: MODERATELY IRRITATING. INGESTION:
LOW ODOR OF ACUTE ORAL TOXICITY.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION, RASHES, HIVES, ALLERGIES.
Medical Cond Aggravated by Exposure:PRE-EXISTING SKIN & EYE DISORDERS.

First Aid:EYES: IMMEDIATELY FLUSH W/PLENTY OF WATER FOR 15 MINS. SKIN:
WIPE & FLUSH W/PLENTY OF WATER FOR 15 MINS. USE SOAP BY WASHING
W/SOAP & WATER. INHALATION: REMOVE TO FRESH AIR & GIVE IF NEEDED.
INGESTION : DON'T INDUCE VOMITING. OBTAIN MEDICALATTENTION IN ALL
CASES. NOTE TO PHYSICIAN: IN GENERAL, EMESIS INDUCTION IS
UNNECESSARY IN HIGH VISCOSITY, LOW VOLATILITY PRODUCTS.

Flash Point:>250F
Extinguishing Media:FOAM, CO2, DRY CHEMICAL
Fire Fighting Procedures:USE SCBA & PROTECTIVE CLOTHING

Spill Release Procedures:AVOID PERSONAL CONTACT. TAKE UP W/ABSORBENT
MATERIAL. PLACE IN A SUITABLE CONTAINER FOR WASTE DISPOSAL.

Handling and Storage Precautions:STORE IN A COOL DRY PLACE W/ADEQUATE
VENTILATION. KEEP AWAY FROM OPEN FLAME & HIGH TEMPS.

Respiratory Protection:DUST MASKS SHOULD BE WORN DURING ANY
GRINDING/MACHINING PROCEDURES ON CURES RESINS.
Ventilation:GENERAL/LOCAL EXHAUST: SHOULD BE USED IN CONFINED
AREAS/WHERE VAPOR CONCENTRATION EXCEEDS THE TLV'S.
Protective Gloves:CHEMICAL RESISTANT
Eye Protection:SAFETY GLASSES/GOGGLES
Other Protective Equipment:IMPERVIOUS RUBBER/PLASTIC. WEAR CLEAN LONG
LEG & SLEEVED CLOTHING.
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE. WASH THOROUGHLY AFTER HANDLING/BEFORE SMOKING/EATING/WASH
FACILITIES.
Supplemental Safety and Health
PRACTICE GOOD HOUSKEEPING PROCEDURES TO AVOID ALL SKIN CONTACT &
BREATHING OF VAPORS.

Spec Gravity:1.5
Solubility in Water:NEGLIGIBLE
Appearance and Odor:WHITE PASTE W/MILD EPOXY ODOR
Percent Volatiles by Volume:0

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS & STRONG LEWIS/MINERAL ACIDS.
Stability Condition to Avoid:HEAT, OPEN FLAME, HIGH TEMPS
Hazardous Decomposition Products:CO2, CO, ALDEHYDES & ACIDS
(TOXIC/CORROSIVE)

Waste Disposal Methods:DISPOSE OF IAW/FEDERAL, STATE & LOCAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.